PowerPinner 7105 Glider
The power and simplicity of our 7005 with a movable weld head!
Contractors who regularly line large fittings and straight duct will find the convenience of the PowerPinner Glider speeds their assembly and reduces their fabrication costs. The weld head travels a full 60 inches for lining 5-foot wide duct.
The head is moved with a multi-position extension arm and glides on specially designed bearings. A weld pin is set each time the operator squeezes the pistol grip's trigger. Small duct sections can be easily lined by locking the weld head in the forward position, moving the extension arm to its vertical position and activating the foot pedal.
Moving Head
Speeds production.
Flange Cutouts
Permit continuous lining of flat or L section flanged duct.
New Improved Reliability
The PowerPinner Glider 7105 Moving Head Welder uses a PLC (Programmable Logic Control) and non-contact proximity sensors in place of pneumatic valves and mechanical actuators.
Easy To Operate
Simple logical controls reduce operation training.
Standard 5 Foot Throat
Fastens large duct sections, reducing material handling.
Front Mounted Component Cabinet
Affords easy access for service needs.
Visual Load Cycle
Quickly confirms electronic functions.
NEMA 12-Rated Electrical Cabinet
Protects electrical component to minimize machine down-time.
Lightweight Foot Pedal
Allows easy movement by operator; cord protector prevents damage.
Compact
Place between work tables for efficient work flow.
Specifications
| Input Voltage | 190-240 VAC 60Hz, 1 Phase, 30 Amp |
|---|---|
| Air Requirement: | 2-3 CFM, 80 PSI |
| Working Depth | 60" |
| Anvil Height | 36" |
| Total Depth | 71" |
| Total Width | 32" |
| Weight | 800 Lbs. |
| Freight Class | 70 |